ROBLIN Creatix/2 800 Manuel d'instructions télécharger pdf (Page 18)

RECYCLING VERSION AIR OUTLET

To install the hood in recycling version, the op-

tional charcoal filter kit must be purchased.

• Remove the chimney angle bracket.

• Screw the filter cover onto the air outlet, using

four screws 12c (2.9 x 12.5).

• Fix the air outlet grid 8 on the recirculation air

outlet using the 2 screws 12d (2,9 x 9,5) pro-

vided.

12c

12d

Fitting the Lighting Unit

• A pre-perforated plug is provided on the top part

of the Hood set up for the lighting unit. This must

be opened using a tool.

• Insert the Lighting unit cable into the opening.

• Rest the Lighting unit 9 on the upper part of the

hood.

• Fix it using the Screws 12r provided.

• Remove grease filters.

• Inside the hood canopy near the Plug that has just

been broken open there is a wiring box for

connection of the lighting unit.

• Open the box and connect the wires to the

terminal inside it, checking that the colours are

combined properly.

• Close the wiring box, replace the grease filters

and close the doors.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 55 56

Pas de commentaire

ROBLIN Creatix/2 800 Manuel d'instructions Page 18